One of the nightmares of smartphone users is that the phone cannot charge after being plugged in. Because your battery is already low, you are anxiously looking for the reason and the corresponding solution.
If you are now asking me, what should I do if my phone charger is plugged in but not charging. Then this guide can solve your doubts.

My charger is not damaged but it won’t charge my phone ？

At that time, your phone could not charge due to the following reasons: 1. Charging cable or adapter problem 2. Dirty charging port 3. Software problem 4. Battery health 5. Charging port failure. These may cause your phone to not charge. But we encounter more in daily life because of problems with charging cables or adapters that affect charging, so let’s talk about charging cables or adapters in detail.

Problems that may occur with charging cables or adapters

1、Physical damage:

1. Internal cable breakage: Over time, frequent bending or rough use can cause the internal wires of the charging cable to break. Although it looks intact, the internal wiring may not conduct electricity properly and cannot charge our mobile phones.
2. Damaged connector: The connector of the charging cable (such as Type-C, Lightning, or Micro-USB) may be deformed or loose due to frequent plugging and unplugging. This can cause poor contact, which prevents the phone from charging.

2、Power adapter failure:

1. Overheating or damage to the adapter: If the power adapter is used for too long, the internal components may age or overheat. If the adapter cannot convert the current correctly, your phone will not get enough power to charge.
2. Unstable voltage: A faulty or low-quality adapter may output unstable voltage. This will not only cause charging problems, but also damage the battery of the phone.

3、Non-original or incompatible accessories:

1. Non-original charging cable: Some third-party charging cables may be of poor quality and may not provide enough current or voltage, resulting in slow charging or no charging at all. Especially for the Lightning interface of Apple phones, the charging data cable for Apple phones must be equipped with MFI certification to charge the phone.
2. Incompatible adapter: Some adapters may not meet the power requirements of your phone, especially for phones that support fast charging. Using an incompatible adapter may cause unstable charging or no charging at all.

4、Loose connection:

1. Incomplete insertion: If the charging cable is not fully inserted into the charging port of the phone, or the adapter is not firmly inserted into the power outlet, the connection may be weak and the phone will not charge.
2. Oxidized or dirty connector: The metal part of the charging cable or adapter may be oxidized, or there may be dust or dirt inside the charging port, affecting the charging connection.

By checking the charging cable, adapter, and connection, you can determine if any of these issues are present. If the problem is with the charging cable or adapter, replacing or repairing them will likely resolve the charging issue.

Here are the products we recommend to you:

1、mobile phone charger :IET65AC-2

Product Introduction

With this charger, you can charge two devices at the same time. Although 65W of power may not seem like much, it is enough to run and charge a MacBook Pro; if you have a smaller laptop, this device can fully charge it.
This phone charger comes with US, UK, EU, and Australian plugs, and you can choose the corresponding plug according to your needs
IET65AC-2 Technical Specifications: Ports: 1x USB-C and 1 x USB-A | Single port maximum output: 65W | Dimensions: 3.43.78.7cm/1.34 x 1.46 x 3.43 inches | Weight: 86 grams

1、Charging cable :IET15UC

Product Introduction

Our Nylon Braided USB 2.0 A to Type-C Cable is perfect for keeping in your purse or pocket and pairs well with portable battery chargers. It complies with USB 2.0 High Speed ​​specifications and is also backward compatible with 1.0 and 1.1. The Type-A male end plugs into your computer, laptop, or wall charger, and the Type-C can charge or transfer data for the latest iPhone models and Android phones (there is also a Lightning interface, please feel free to contact us if you need it). The contacts in the connector are gold-plated to prevent corrosion and extend the life of the cable.

Technical Specifications: Total Output – 66W, Length 1m (custom lengths accepted), Color: Black, Grey (custom colors accepted)