`$q8~e48a8w16``vauj 0rg

Nylon 2A cable Dismantling evaluation report 【IET2020C1】

Step 1. Appearance and basic specifications

image 46

Specification:
Model: IET2020C1
Material:Nylon+ABS
Connector:USB C/ Micro/Lighting
power:10W
Output:5V 2A

image 32

The nylon material feels soft, and the joints are all ABS materials that wrap the PCB and chips.

image 33

The measured product weight is 27g only, Very light and easy to carry.

image 34

Test wire diameter 3.84mm

Step 2. Functional test

image 35

Mobile phone charging test

image 36

Data transmission test

image 37

cable resistance test

image 38

The actual test voltage is 5V, the maximum current can reach 2A, and the power is 10W, which can meet most mobile phone charging requirements.

Step 3. Disassemble

image 39

The smooth shell is convenient for customers to customize.

image 40

The standard connector is easy to plug and unplug.

image 41

Peel off the cut the PVC shell . You can see that the wires are neatly soldered on the PCB.

image 42

Under the nylon braid is a PVC sheath with four cores inside.

image 43

Look at its cross-sectional area

image 44

There are four cores inside the PVC sheath, black and red are power cords, and green and white are data transmission.

image 45

The disassembly is complete, and all the accessories are taken photo together.

Step 4. Summarize

Soft touch, simple design and low price. The pure copper core is used internally, and the quality is stable. Suitable for most mobile phone models. High performance-price ratio, highly recommended.

Leave a Reply

Your email address will not be published. Required fields are marked *